Specialty Materials for Electronic Assembly
ITARQuality Assurance Systems | ISO 9001 : 2008
All Categories > Thermal Interface Materials > Phase Change Thermal Interface > THERMFLOW Phase-Change Thermal Interface Pads > View Items  
Download PDF Download PDF     Printable Page     Email Email This Page     Save To Favorites Save To Favorites

THERMFLOW Phase-Change Thermal Interface Pads

 
Check up to five results to perform an action.

Phase-Change

larger image
THERMFLOW™ materials are thermally enhanced polymers designed to minimize the thermal resistance between power dissipating electronic components and their associated heat sinks. This low thermal resistance path maximizes heat sink performance and improves the reliability of microprocessors, memory modules, DC/DC converters and power modules.

The key feature of THERMFLOW materials is their phase-change characteristic. At room temperature, THERMFLOW materials are solid and easy to handle. This allows them to be consistently and cleanly applied as dry pads to a heat sink or component surface. THERMFLOW material softens as it reaches component operating temperatures. With light clamping pressure it will readily conform to both mating surfaces, similar to thermal grease. This ability to completely fill interfacial air gaps and voids typical of component packages and heat sinks allows THERMFLOW pads to outperform nonflowing elastomeric or graphite-based thermal pads and achieve performance comparable to thermal grease.

THERMFLOW materials are electrically non-conductive. However, since metal-to-metal contact is possible after the material undergoes phase-change in a typical heat sink assembly, THERMFLOW pads should not be used as electrical insulators.



   
  Results 1 - 7 of 7 1 

Item #

Color

Carrier

Standard Thickness

Specific Gravity

Phase Transition Temperature

Operating Temperature Range
PC07DM-7 Pink 1 mil Polyester 0.178 mm
0.007 in 		1.1 55 ºC –55 to 125 ºC
–67 to 257 ºF
T710 with PSA Light gray/off white 2 mil Fiberglass 0.138 mm
0.0055 in 		1.15 45 ºC –55 to 125 ºC
–67 to 257 ºF
T725 Pink None - Free film 0.125 mm
0.005 in 		1.1 55 ºC –55 to 125 ºC
–67 to 257 ºF
T766 Purple/gray foil 1 mil Metal Foil 0.088 mm
0.0035 in 		2.6 55 ºC –55 to 125 ºC
–67 to 257 ºF
T557 Gray None - Free film 0.125 mm
0.005 in 		2.4 45/62 ºC –55 to 125 ºC
–67 to 257 ºF
T558 Gray/gray foil 1 mil Metal Foil 0.115 mm
0.0045 in 		3.65 45/62 ºC –55 to 125 ºC
–67 to 257 ºF
T777 Gray None - Free film 0.115 mm
0.0045 in 		1.95 45/62 ºC –55 to 125 ºC
–67 to 257 ºF
  Results 1 - 7 of 7 1