Electronic Assembly and Fabrication Tapes on Robert McKeown Co., Inc.

CATALOG EMI / ESD Grounding Thermal Management Encapsulating/Coating Adhesives & Sealants Electronic Tapes


All Categories > Electronic Tapes > Electronic Assembly and Fabrication Tapes


	Electronic Assembly and Fabrication Tapes
	Click on a category to drill down.


		High Temperature Film PTFE films provide a conformable release surface and exhibit a remarkably low coefficient of friction and non-stick properties. PTFE films have high temperature resistance and are virtually unaffected by all chemicals. At elevated temperatures, PTFE film still retains excellent tensile strength. Service temperatures range from -100°F to +500°F (-73°F to +260°C). Film applications include high temperature coil and capacitor wrapping, composite bonding, masking, and conveyor release linings.




		Polyimide Films Polyimide films are employed because of their extreme heat resistance. Service temperatures range from -100 °F to +500 °F (-73 °C to +260 °C). These flame retardant films exhibit high tensile strength and conformability, good solvent resistance, excellent dielectric strength and good abrasion resistance. Polyimide tape applications include electrical insulation, capacitor, transformer, and coil wrapping, electronic assembly, and wave solder protection.




		Polyimide Films (4) The heat resistance and dielectric strength of polyimide tapes make them excellent choices for high temperature insulation and processing applications.




		Acetate Cloth Tapes 3M™ Acetate Cloth Tape is an aesthetically pleasing tape which offers excellent conformability in coil wrapping applications up to 105 °C. 3M™ Acetate Cloth Tape also offers excellent absorption of resins and varnishes. Available in custom widths from 1/8 in to 24 in, and comes standard on a 72 yd roll on a 3 inch diameter core.




		Acetate Cloth Tape (2) Acetate cloth backing and a thermosetting rubber adhesive system create a hand tearable product with high adhesion, conformability, printability and excellent insulating properties.




		CHO-FOIL Conductive Tapes (70) CHO-FOIL EMI Shielding Tape with Conductive Adhesive (Copper, Aluminum or Tinned Copper) Chomerics’ CHO-FOIL tapes are an economical EMI shielding solution for a variety of commercial uses. The tapes are available in copper, aluminum, or tinned copper foil backed with Chomerics’ highly conductive pressure-sensitive adhesive (Recognized Under the Component Program of Underwriters Laboratories, Inc.). CHO-FOIL copper tape is available with a non-conductive adhesive for applications requiring surface conductivity only. An embossed version of CHO-FOIL copper tape is also available, for a more attractive appearance up to 6 inches (152 mm) wide. Standard length rolls and die-cut custom shapes can be ordered. CHO-FAB EMI ... Search CHO-FOIL Conductive Tapes - 70 Items




		CHO-FOIL Conductive Laminates (14) Mechanical, electrical and processing properties, plus economy for commercial applications. Chomerics produces a growing family of specialty laminated materials for EMI shielding. These laminates are available in bulk rolls for customizing into EMI shields, ground planes, ground straps, shadow shields, ESD shields and a host of other electronics applications. EMI shielding performance exceeds that of conductive coatings when properly designed. Laminates provide an environmentally friendly solution that eliminates solvents, conductive paints, or plating processes. With their thin cross sections and light weight, EMI shielding laminates are also a space-saving solution. Construction Shielding laminates ...




		CHO-MASK II Conductive Foil Tape with Peel-Off Mask (8) Easy-to-use CHO-MASK II conductive foil tape provides a cost-effective alternative to chromate conversion coating, plating and conductive paints. CHO-MASK II tape consists of a 3 mil polyester paint mask covering a layer of 2 oz. (56.7g) tin-plated copper foil. The solvent/chemical resistant tape can withstand baking temperatures of up to 400 °F (204 °C) while maintaining excellent adhesion and conductivity. CHO-MASK II foil tape meets MIL-T-47012 and the tin-plating meets MIL-T-10727. The adhesive contains highly stable, conductive particles which provide long-term reliability. CHO-MASK II tape is applied to clean metal frame, door and panel surfaces where electrical continuity is required. The mask’s recessed edge allows ...




		Foil Products (4) Nitto Denko’s foil products are engineered to provide the highest EMI/RFI shielding effectiveness available in a pressure sensitive tape. Our interlined products permit ease of die cutting and are highly conformable for convenient application.




		Foil Products




		Speciality Tape (4) The unique characteristics of these tapes make them ideally suited for high voltage insulation applications. Zone coating allows for complete impregnation of the varnish.




		Paper Electronic Tape (7) Paper Electronic Tapes are designed to satisfy a variety of in-process and packaging needs of "Through-Hole" electronic component manufacturers.




		Paper Electronic Tapes 3M™ Paper Electrical Tapes are used for banding coils, covering bobbin-wound coils, and for end-turn taping.