Dow Silicone Primers
Fluids and Silicone Primers
Primer selection guide
Specification Writers: Please contact your local Dow sales office or your Global Dow Connection before writing specifications on these products.
A gel can simply be poured into the cleaned repaired area and cured. When repairing an area using an encapsulant, roughen the exposed surfaces of the cured encapsulant with an abrasive paper and rinse with a suitable solvent. This will enhance adhesion and permit the repaired material to become an integral matrix with the existing encapsulant. Silicone prime coats are not recommended for adhering products to themselves.
Specification Writers: Please contact your local Dow sales office or your Global Dow Connection before writing specifications on these products.
A gel can simply be poured into the cleaned repaired area and cured. When repairing an area using an encapsulant, roughen the exposed surfaces of the cured encapsulant with an abrasive paper and rinse with a suitable solvent. This will enhance adhesion and permit the repaired material to become an integral matrix with the existing encapsulant. Silicone prime coats are not recommended for adhering products to themselves.
Item # |
Flash Point |
Volatile Organic Content (VOC) |
Special Properties |
For Use On |
For Use With |
---|---|---|---|---|---|
P5200 Clear | Flash Point N/A 31 (87) ºC31 (87) ºF | Volatile Organic Content (VOC) N/A 77/522 g/L | Special Properties N/A | For Use On N/A Most metals, glass, ceramics and some plastics | For Use With N/A Pigmented two-part addition cure |
PR-1200 Clear | Flash Point N/A 13 (55) ºC13 (55) ºF | Volatile Organic Content (VOC) N/A 723 g/L | Special Properties N/A | For Use On N/A Most metals, glass, ceramics and some plastics | For Use With N/A Pigmented two-part addition cure |
PR-1200 Red | Flash Point N/A 13 (55) ºC13 (55) ºF | Volatile Organic Content (VOC) N/A 723 g/L | Special Properties N/A Colored for easier identification | For Use On N/A Most metals, glass, ceramics and some plastics | For Use With N/A Pigmented two-part addition cure |
P5200 Red | Flash Point N/A 31 (87) ºC31 (87) ºF | Volatile Organic Content (VOC) N/A 77/521 g/L | Special Properties N/A Colored for easier identification | For Use On N/A Most metals, glass, ceramics and some plastics | For Use With N/A Pigmented two-part addition cure |
PR-1204 | Flash Point N/A 8 (46) ºC8 (46) ºF | Volatile Organic Content (VOC) N/A 753 g/L | Special Properties N/A | For Use On N/A Most metals, glass and ceramics | For Use With N/A All one-part alcohol cure |
PR-1205 | Flash Point N/A 13 (55) ºC13 (55) ºF | Volatile Organic Content (VOC) N/A 862 g/L | Special Properties N/A Film-forming | For Use On N/A Most plastics | For Use With N/A All |
92-023 | Flash Point N/A –13 (9) ºC–13 (9) ºF | Volatile Organic Content (VOC) N/A 681 g/L | Special Properties N/A Improves inhibition resistance | For Use On N/A Most metals, glass and ceramics | For Use With N/A All two-part addition cure |
Sylgard® Prime Coat | Flash Point N/A –13 (9) ºC–13 (9) ºF | Volatile Organic Content (VOC) N/A 688 g/L | Special Properties N/A | For Use On N/A Most metals, glass and ceramics | For Use With N/A All two-part addition cure |