Robert McKeown Company, Inc.
Robert McKeown Company, Inc.
111 Chambers Brook Road
Branchburg NJ 08876
Toll Free: 1.800.631.1125
Phone: 908.218.9000
Fax: 908.218.8949
Email: sales@robertmckeown.com
Website: www.robertmckeown.com
Print Back
Soft Shield commercial-grade EMI gaskets are designed for shielding and grounding in today's commercial electronic enclosures. They consist of an electrically conductive fabric jacket over a highly compressible urethane foam core. Nickel-plated-silver, woven nylon rip-stop jacket is self-terminating when cut. A broad range of highly compressible profiles are available as strips or kiss-cut parts, in both UL 94V-0 and General Duty versions. Pressure-sensitive adhesive attachment tape is provided standard for easy application.
Unit of Measure

Specifications

Product Forms

 N/A SQ, REC., D, C, P, L and Custom

Typical Applications

 N/A Doors, Panels, Seams, Faceplates, Ground Pads

Method of Manufacture

 N/A Wrapped foam

Jacket Material

 N/A Ni/Cu Plated Taffeta Polyester

Foam

 N/A Standard performance Urethane Foam
Attachment Method (PSA)1 N/A Non conductive, closed cell, acrylic PSA

Thickness Standard

 N/A 1 mm1.5 mm2 mm3 mm4 mm5 mm0.039 in0.060 in0.078 in0.118 in0.157 in0.197 in

Application

 N/A Designed where the gasket sees minimal level of compression cycles over product life.

Performance Ratings

Baseline EMI Shielding

 N/A 80 dB

Shielding Effectiveness After Cycling

 N/A Good

Softness

 N/A Best

Test Method Compression Set

 N/A ASTM D395 - Method B

Compression Set

 N/A 70 ºC - 25 %

Max. Operating Temperature

 N/A 70 ºC

UL Rating

 N/A UL 94 V-0

RoHS Compliant

 N/A Yes

Ordering Information

N/A
SOFT-SHIELD 4000 Series Ordering information:

WWWW-XXX-YYYY-ZZZZ
WWWW - Material (4002, 4004, 4005)YYYY - Width (0127 = 12.7 mm)
ZZZZ - Length (2540 = 254 mm)

For custom die-cut parts, use the part number WWWWXXX-L0000, for which Chomerics will assign the actual drawing number L0000. Note: Fully-wrapped (360°) custom gaskets are not available in SOFT-SHIELD 4002 or 4004 materials.

SOFT-SHIELD 4800/4850 Series Ordering information:

4800-XX-YYYY-ZZZZ
or
4850-XX-YYYY-ZZZZ
XX - 10 no PSA or 11 with PSA
YYYY - Width (maximum 610 mm)
ZZZZ - Thickness (ex. 0150 = 1.5 mm)

For custom die-cut parts, contact Inside Sales

  • 1 PSA typically covers less then 50 % of contact area. Upon compression the conductive fabric will make direct contact to the interface.