Gray; 1 part – no mixing required; heat cure; medium viscosity providing flow/fill/self-leveling after dispensing process
Unit of Measure
Specifications
Type |
N/A One-Part Heat Cure |
One or Two Part |
N/A 1 |
Color |
N/A Gray |
Viscosity/Flowability |
N/A 87025 |
Durometer |
N/A 59 A |
Tensile Strength |
N/A 855 psi5.9 MPa59 kgf/cm² |
Elongation |
N/A 240 % |
Specific Gravity |
N/A 1.31 |
Heat Cure Time |
N/A 30 min at 150 ºC, 60 min at 125 ºC |
Unprimed Adhesion Lap Shear |
N/A 880 psi600 N/cm²61 kgf/cm² |
Linear Coefficient of Thermal Expansion |
N/A 250 ppm |
Shelf Life from Date of Manufacture |
N/A 12 months at < 4 ºC |
Dielectric Strength |
N/A 350 V/mil14 kV/mm |
Dielectric Constant at 100 Hz |
N/A 3.02 |
Dielectric Constant at 100 kHz |
N/A 2.95 |
Dissipation Factor at 100 Hz |
N/A 0.012 |
Dissipation Factor at 100 kHz |
N/A 0.0031 |
Volume Resistivity |
N/A 1.6E+14 O/cm |
Agency Listing |
N/A NA |
