Robert Mckeown Co., Inc
111 Chambers Brook Rd.
Branchburg, NJ 08876 US
Phone: 908.218.9000 • Fax: 908.218.8949
Email: sales@robertmckeown.com
All Categories > Electronics Potting & Encapsulation > Silicone Potting/Encapsulant Gels > Item # 3-4241  


Silicone-Potting-Encapsulant-Gels

larger image

Item # 3-4241, Dow Dielectric Tough Gel Kit

Gels are a special class of encapsulants that cure to an extremely soft material. They are used to provide high levels of stress relief to sensitive circuitry. Gels perform many important functions in electronics. Their major job is to protect electronic assemblies and components from adverse environments by:
  • Functioning as dielectric insulation
  • Protecting the circuit from moisture and other contaminants
  • Relieving mechanical and thermal stress on components
Dow offers a line of standard gels, a line of low-temperature gels for applications requiring low-temperature performance. A line of toughened gels for use where chemical adhesion and dimensional stability are required, and a line of specialty gels for applications requiring low extractables, ultra-violet (UV) cure, or resistance to solvents and fuels. In addition, Dow offers custom gels that can be quickly tailored to meet specific application needs for properties such as color, viscosity, hardness, and cure rate.





Specifications  · Product Form  · Features

Specifications

Specific Gravity1
0.97/0.98 g/cc

Type
Toughened Gels

Cure System
Addition cure

Color
Translucent green

Viscosity [cPs or mPa·s]
400

Penetration [1/10 of mm]
63 Shore 00 (Measured by durometer rather than penetration.)

Shelf Life2
12 months

Working Time
> 60 min

Room Temperature Cure Time3
8 h/11 h

Heat Cure Time
2 at 125 ºC (Time to adhesion may take longer.)

Dielectric Strength
450 V/mil
17 kV/mm

Dielectric Constant at 100 Hz/100 kHz
2.6/2.61

Volume Resistivity
3.30E+14 O/cm

Dissipation Factor at 100 Hz/100 kHz
0.021/0.0002

Linear Coefficient of Thermal Expansion
325 µm/(m·ºC)
1 Cured or uncured A & B.
2 Shelf life from date of manufacture for material in the original, unopened container, stored at less than 35ºC, unless otherwise noted.
3 Time to non-flow/full cure.


Product Form

2-part, translucent green, 1:1 mix ratio, fast heat cure


Features

Fast heat cure; blue and yellow parts turn green when mixed; conditional primerless adhesion at room temperature; mechanical strength; UL 94 V-1 Flammability Rating; UV indicator for inspec tion; long working time

Under certain conditions in specific designs or applications, Dielectric Firm Gels may lose adhesion. Full environmental exposure testing is recommended.