Print Back
Primer selection guide
Specification Writers: Please contact your local Dow sales office or your Global Dow Connection before writing specifications on these products.

A gel can simply be poured into the cleaned repaired area and cured. When repairing an area using an encapsulant, roughen the exposed surfaces of the cured encapsulant with an abrasive paper and rinse with a suitable solvent. This will enhance adhesion and permit the repaired material to become an integral matrix with the existing encapsulant. Silicone prime coats are not recommended for adhering products to themselves.
Dow® Silicone Primers
Unit of Measure
Items Dow® Silicone Primers
P5200 Clear
Dow Silicone Primers
Dow® Silicone Primers
PR-1200 Clear
Dow Silicone Primers
Dow® Silicone Primers
PR-1200 Red
Dow Silicone Primers
Dow® Silicone Primers
P5200 Red
Dow Silicone Primers
Dow® Silicone Primers
PR-1204
Dow Silicone Primers
Flash Point N/A 31 (87) ºC31 (87) ºF N/A 13 (55) ºC13 (55) ºF N/A 13 (55) ºC13 (55) ºF N/A 31 (87) ºC31 (87) ºF N/A 8 (46) ºC8 (46) ºF
Volatile Organic Content (VOC) N/A 77/522 g/L N/A 723 g/L N/A 723 g/L N/A 77/521 g/L N/A 753 g/L
Special Properties N/A N/A N/A Colored for easier identification N/A Colored for easier identification N/A
For Use On N/A Most metals, glass, ceramics and some plastics N/A Most metals, glass, ceramics and some plastics N/A Most metals, glass, ceramics and some plastics N/A Most metals, glass, ceramics and some plastics N/A Most metals, glass and ceramics
For Use With N/A Pigmented two-part addition cure N/A Pigmented two-part addition cure N/A Pigmented two-part addition cure N/A Pigmented two-part addition cure N/A All one-part alcohol cure