One-part; low flow; gray
Unit of Measure

Specifications

Type

 Thermally Conductive Adhesives

Product Form

 One-Part

Color

 Gray

Viscosity

 58000 mPa/s

Durometer

 92 A

Tensile Strength

 900 psi6.2 MPa63.3 kgf/cm²

Elongation

 20 %

Specific Gravity

 2.7

Linear CTE

 126 µ/mC
Heat Cure Time at 100 ºC (212 ºF)1 90 min
Heat Cure Time at 125 ºC (257 ºF)2 30 min
Heat Cure Time at 150 ºC (302 ºF)3 20 min

Unprimed Adhesion Lap Shear

 640 psi440 N/cm²45 kgf/cm²
Thermal Conductivity4 1.9 W/m·K

Shelf Life from Date of Manufacture

 6 months at 5 ºC

Dielectric Strength

 425 V/mil16.7 kV/mm

Dielectric Constant at 100 Hz

 4.98

Dielectric Constant at 100 kHz

 4.86

Dissipation Factor at 100 Hz

 0.008

Dissipation Factor at 100 kHz

 < 0.003

Volume Resistivity

 2.20E+14 O/cm

Features

N/A
Rapid heat cure; high thermal conductivity

Potential Uses

N/A
Bonding integrated circuit substrates; adhering lids and housings; base plate attach; heat sink attach

Application Methods

N/A
Automated or manual dispensing

  • 1 Time to 90 percent of final hardness and adhesion or 90 % of curve height for elastic modulus; additional time may be required for the part to warm to near oven temperature.
  • 2 Time to 90 percent of final hardness and adhesion or 90 % of curve height for elastic modulus; additional time may be required for the part to warm to near oven temperature.
  • 3 Time to 90 percent of final hardness and adhesion or 90 % of curve height for elastic modulus; additional time may be required for the part to warm to near oven temperature.
  • 4 Thermal Conductivity at 25 ºC (77 ºF)