Gray; 2-part (10:1 mix ratio) – heat cure; medium viscosity providing flow/fill/self-leveling after dispensing process; long working time – reducing need for equipment purge/clean-up; cure can be accelerated with elevated temperatures for faster processing; two-part system enables deep section and confined cures; MIL-PRF-23586F QPL (qualified product listing); high tensile strength; UL 94V-0 flammability rating; room temperature storage
Unit of Measure
Specifications
Type |
N/A Two-Part Heat Cure |
One or Two Part |
N/A 2 |
Color |
N/A Gray |
Viscosity/Flowability |
N/A 112500 |
Durometer |
N/A 63 A |
Tensile Strength |
N/A 940 psi6.5 MPa65 kgf/cm² |
Elongation |
N/A 200 % |
Specific Gravity |
N/A 1.29 |
Working Time at Room Temperature |
N/A 22 h |
Heat Cure Time |
N/A 60 min at 125 ºC |
Unprimed Adhesion Lap Shear |
N/A 960 psi650 N/cm²66 kgf/cm² |
Linear Coefficient of Thermal Expansion |
N/A 300 ppm |
Shelf Life from Date of Manufacture |
N/A 12 months at < 32 ºC |
Dielectric Strength |
N/A 500 V/mil20 kV/mm |
Dielectric Constant at 100 Hz |
N/A 2.83 |
Dielectric Constant at 100 kHz |
N/A 2.78 |
Dissipation Factor at 100 Hz |
N/A 0.006 |
Dissipation Factor at 100 kHz |
N/A 0.0004 |
Volume Resistivity |
N/A 1.3E+15 O/cm |
Agency Listing |
N/A UL 94V-0/ MIL-PRF-23586F |
