Item # SE 1700 Clear or White, Electronics Adhesive Sealants On Robert McKeown Co., Inc.

All Categories > Adhesives & Sealants > Silicone Adhesive/Sealants > Electronics Adhesive Sealants > Item # SE 1700 Clear or White


	Item # SE 1700 Clear or White, Electronics Adhesive Sealants

larger image

Translucent; 2-part (10:1 mix ratio); heat cure; non-flow after dispensing process; long working time after 2-part mix – reducing need for equipment purge/clean-up; high tensile strength; cure can be accelerated with elevated temperatures for faster processing; room temperature storage

Specifications · Features · Potential or Typical Uses

Specifications

Type		Two-Part Heat Cure

One or Two Part		2

Color		Translucent

Viscosity/Flowability		610000

Durometer		46 JIS A

Tensile Strength		1000 psi 6.9 MPa 70 kgf/cm²

Elongation		420 %

Working Time at Room Temperature		8 h

Heat Cure Time		30 min at 150 ºC

Unprimed Adhesion Lap Shear		420 psi 290 (AL) N/cm² 29.5 kgf/cm²

Shelf Life from Date of Manufacture		18 months at < 30 ºC

Dielectric Strength		550 V/mil 22 kV/mm

Dielectric Constant at 1 MHz		3

Dissipation Factor at 1 MHz		1.00E-03

Volume Resistivity		5.0E+14 O/cm

Agency Listing		NA

Features

Non-flowing; 10:1 mix ratio; heat cure; high tensile strength; good working time after mixing

Potential or Typical Uses

Sealing ceramic condensers; sealing electronic components; bonding agent for key pad of PCs

Item # SE 1700 Clear or White, Electronics Adhesive Sealants

Type

One or Two Part

Color

Viscosity/Flowability

Durometer

Tensile Strength

Elongation

Working Time at Room Temperature

Heat Cure Time

Unprimed Adhesion Lap Shear

Shelf Life from Date of Manufacture

Dielectric Strength

Dielectric Constant at 1 MHz

Dissipation Factor at 1 MHz

Volume Resistivity

Agency Listing