Translucent; 1 part – no mixing required; moisture cure (RTV) – no oven required; solvent-free – no ventilation required; UV indicator for automated inspection; cure system can be heat accelerable for faster in-line processing; medium viscosity for moderate flow/fill/self-leveling after dispensing process; Mil Spec A-46146 QPL (qualified product listing); UL-94V-1 flammability rating; high elongation value for vibration/mechanical shock dampening and low stress
Unit of Measure



N/A One-Part Moisture Cure RTV

One or Two Part

N/A 1


N/A Translucent


N/A 35950


N/A 34 A

Tensile Strength

N/A 495 psi3.0 MPa31 kgf/cm²


N/A 420 %

Specific Gravity

N/A 1.04

Room Temperature Tack-Free Time

N/A 105 min

Room Temperature Cure Time

N/A 72 h

Linear Coefficient of Thermal Expansion

N/A 325 ppm

Shelf Life from Date of Manufacture

N/A 12 months at < 32 ºC

Dielectric Strength

N/A 450 V/mil18 kV/mm

Dielectric Constant at 100 Hz

N/A 2.52

Dielectric Constant at 100 kHz

N/A 2.52

Dissipation Factor at 100 Hz

N/A 0.004

Dissipation Factor at 100 kHz

N/A 0.0010

Volume Resistivity

N/A 2.1E+14 O/cm

Agency Listing

N/A UL 94V-1/ MIL-A-46146


Good flowability; room temper a ture cure; no added solvents; UV indicator for inspection; UL 94V-1 and Mil-A-46146

Potential or Typical Uses

Sealing lids and housings where grooves or other configurations support a flowable material or where limited flow is desired