Specialty Materials for Electronic Assembly
ITARQuality Assurance Systems | ISO 9001 : 2008
All Categories > Electrically Conductive Tape & Composite Adhesives > General Purpose Tapes > Silicone Solid Rubber Tape > Item # 600  
Download PDF Download PDF     Printable Page     Email Email This Page     Save To Favorites Save To Favorites

Item # 600, Silicone Solid Rubber Tape


Silicone Solid Rubber

larger image
COHRlastic solid silicone rubber in square sheet and continuous length form has a smooth, blemish-free surface. It is available in degrees of hardness from relatively soft 30 durometer to the relatively hard 70 durometer on the Shore A scale. It is manufactured in different formulations to provide a choice of physical properties and cost considerations.

Series 300-700 COHRlastic generalpurpose molded sheet is available in thicknesses up to 1/2" and it withstands temperatures from –100 °F to +500 °F.

Series 9030 - 9070 COHRlastic is also general-purpose, but is produced in 36" wide continuous lengths for the most efficient utilization of material, minimizing waste. Standard thicknesses are 1/32", 1/16" and 1/8".Withstands temperatures from –100 °F to +500 °F. Please consult plant for availability of additional thicknesses and colors.

Series 9200 high-performance COHRlastic provides excellent tensile strength and superior tear resistance. It is tougher and more resilient than generalpurpose silicone. Standard thicknesses are 1/32", 1/16" and 1/8", and it withstands temperatures ranging from –100°F to +400 °F. A minimum thickness of .015" is available on a minimum quantity basis. Red color is standard for general-purpose goods. Black or gray can be provided on a minimum quantity basis.The 9200 series is standard in gray, but clear or red can be supplied on a minimum quantity basis. Contact plant for minimums.




 Specifications   

Dielectric Strength Approx.
500 V/mil

Thermal Conductivity (Average)
4.4 x 10-4 x (cal·cm/ºC·cm·s) 1.3 BTU i./h·ft2 ºF

Specific Heat
0.3 BTU/lb/ºF

Linear Thermal Expansion1
1.5 x 10-4

Width/Sheet Size
36 x 36 in

Color
Red

Thickness2
1/16 ±.016 in
1/2 ±.016 in
1/4 ±.016 in
1/8 ±.016 in
3/16 ±.016 in
3/32 ±.016 in
3/8 ±.016 in
5/16 ±.016 in

ZZ-R-765, Class 2a & 2b (Grade)
60

AMS
3303

Test Method Durometer
D2240

Durometer (Shore A ±5)3
60

Test Method Tensile Strength
D412

Tensile Strength4
700 psi

Test Method Elongation
D412

Elongation5
200 %

Test Method Tear Strength
D624

Tear Strength6
65 ppi

Test Method Compression Set
D395

Compression Set after 70 h at 320 ºF7
15 %

Durometer Change (Points, Shore A) after Dry Heat Aging for 70 h at 437 ºF
+5

Tensile Strength Change after Dry Heat Aging for 70 h at 437 ºF
–15 %

Elongation Change after Dry Heat Aging for 70 h at 437 ºF
–15 %

Durometer Change (Points, Shore A) after Immersion in ASTM Oil #1 (High Aniline Point) for 70 H at 302 ºF
–5

Tensile Strength Change after Immersion in ASTM Oil #1 (High Aniline Point) for 70 H at 302 ºF
–10 %

Elongation Change after Immersion in ASTM Oil #1 (High Aniline Point) for 70 H at 302 ºF
–10 %

Volume Change after Immersion in ASTM Oil #1 (High Aniline Point) for 70 H at 302 ºF
+5 %
1 Room temperature to +350 ºF
2 Thickness 3/32 in - special order. Minimum quantities apply.
3 Die B Method B, ASTM D2000 + Fed. Spec. ZZ-R-765.
4 Die B Method B, ASTM D2000 + Fed. Spec. ZZ-R-765.
5 Die B Method B, ASTM D2000 + Fed. Spec. ZZ-R-765.
6 Die B Method B, ASTM D2000 + Fed. Spec. ZZ-R-765.
7 Die B Method B, ASTM D2000 + Fed. Spec. ZZ-R-765.


 MORE IMAGES 

·  Silicone Solid Rubber 2