1-part, white or gray, fast tack-free flowable-viscosity conformal coating with controlled volatility and good flame resistance
Unit of Measure

Specifications

Type

Solventless RTV Elastomeric Conformal Coatings

Product Form

1-part RTV cure

Color

Gray White

Viscosity

23300 mPa/s

Durometer

33 A

Specific Gravity

1.19

Room Temperature Tack-Free Time

8 min

Room Temperature Cure Time

360 min

Flammability Classification

94 V-0

UL 746E Approval

No

Shelf Life from Date of Manufacture

15 months

Dielectric Strength

625 V/mil25 kV/mm

Dielectric Constant at 1 MHz

3.1

Dissipation Factor at 1 MHz

4.00E-03

Volume Resistivity

9.00E+14 O/cm

Features

N/A
Fast tack-free room-temperature cure; flowable; cures to soft, low-stress elastomer; pigmented to hinder component identification; UL 94 V-0 flammability rating; controlled silicone volatility; no added solvents

Potential Uses

N/A
Protective coating for rigid and flexible circuit boards, connectors, electronic components, or sensors; fast tack-free cure, highly controlled volatility for use around relays and high-tolerance devices (HDD, DVD, CD).

Application Methods

N/A
Applied by syringe dispense, brush or flow coating.

Cure

N/A
Time to cure is dependent on several variables including the method of application, film thickness, temperature and humidity. Tack- free time in the data table gives an indication of typical times until surface is dry enough to handle. Cure time for full cure are indications of time needed to develop full physical properties such as durometer, tensile strength or adhesion. These times, including full cure time, can be significantly improved by introducing mild heat of 60 °C or less.