1-part, translucent; fast tack-free flowable conformal coating with controlled volatility
Unit of Measure

Specifications

Type

 Solventless RTV Elastomeric Conformal Coatings

Product Form

 1-part RTV cure

Color

 Translucent

Viscosity

 130 mPa/s

Durometer

 25 A

Specific Gravity

 1.01

Room Temperature Tack-Free Time

 15 min

Room Temperature Cure Time

 90 min

UL 746E Approval

 Pending

Shelf Life from Date of Manufacture

 12 months

Dielectric Strength

 850 V/mil33 kV/mm

Dielectric Constant at 1 MHz

 2.7

Dissipation Factor at 1 MHz

 5.00E-03

Volume Resistivity

 1.00E+17 O/cm

Features

N/A
Fast tack-free room-temperature cure; flowable; cures to soft, low-stress elastomer; controlled silicone volatility; no added solvents

Potential Uses

N/A
Protective coating for rigid and flexible circuit boards, connectors, electronic components, or sensors; fast tack-free cure, highly controlled volatility for use around relays, brush motors, and high-tolerance devices (HDD, DVD, CD).

Application Methods

N/A
Applied by spray, brush, flow or some automated pattern coating. May be dip coated with special precautions.

Cure

N/A
Time to cure is dependent on several variables including the method of application, film thickness, temperature and humidity. Tack- free time in the data table gives an indication of typical times until surface is dry enough to handle. Cure time for full cure are indications of time needed to develop full physical properties such as durometer, tensile strength or adhesion. These times, including full cure time, can be significantly improved by introducing mild heat of 60 °C or less.