Primer selection guide
Specification Writers: Please contact your local Dow sales office or your Global Dow Connection before writing specifications on these products.

A gel can simply be poured into the cleaned repaired area and cured. When repairing an area using an encapsulant, roughen the exposed surfaces of the cured encapsulant with an abrasive paper and rinse with a suitable solvent. This will enhance adhesion and permit the repaired material to become an integral matrix with the existing encapsulant. Silicone prime coats are not recommended for adhering products to themselves.
1 - 8 of 8 | Results Per Page | View | Unit of Measure
1 

Item #

Flash Point

Volatile Organic Content (VOC)

Special Properties

For Use On

For Use With

Sort by
N/A 31 (87) ºC31 (87) ºF N/A 77/522 g/L N/A N/A Most metals, glass, ceramics and some plastics N/A Pigmented two-part addition cure
N/A 13 (55) ºC13 (55) ºF N/A 723 g/L N/A N/A Most metals, glass, ceramics and some plastics N/A Pigmented two-part addition cure
N/A 8 (46) ºC8 (46) ºF N/A 753 g/L N/A N/A Most metals, glass and ceramics N/A All one-part alcohol cure
N/A –13 (9) ºC–13 (9) ºF N/A 688 g/L N/A N/A Most metals, glass and ceramics N/A All two-part addition cure
N/A 13 (55) ºC13 (55) ºF N/A 723 g/L N/A Colored for easier identification N/A Most metals, glass, ceramics and some plastics N/A Pigmented two-part addition cure
N/A 31 (87) ºC31 (87) ºF N/A 77/521 g/L N/A Colored for easier identification N/A Most metals, glass, ceramics and some plastics N/A Pigmented two-part addition cure
N/A 13 (55) ºC13 (55) ºF N/A 862 g/L N/A Film-forming N/A Most plastics N/A All
N/A –13 (9) ºC–13 (9) ºF N/A 681 g/L N/A Improves inhibition resistance N/A Most metals, glass and ceramics N/A All two-part addition cure
1 - 8 of 8 | Results Per Page | View | Unit of Measure
1