SOFT-SHIELD 5000 Series EMI gaskets are designed to meet the stringent shielding and mechanical performance requirements of today’s commercial electronic enclosures, medical electronics, factory automation equipment, reprographics and grounding applications. A growing number of standard profiles and sizes provide flexibility when selecting a gasket for a specific application. Custom profiles or sizes can also be produced.

Each SOFT-SHIELD 5000 Series gasket consists of an electrically conductive fabric jacket over a highly compressible urethane foam core. The nickel-plated, woven nylon rip-stop jacket is selfterminating when cut. Chosen for its excellent compressibility, the foam core typically requires less than 1 lb/in (0.175 N/mm) closure force, making it especially useful for thin-walled plastic enclosures. Standard pressure-sensitive adhesive attachment tape (PSA) makes SOFT-SHIELD 5000 Series gaskets a user-friendly and cost-effective design solution.

Every profile in the SOFT-SHIELD 5000 Series can be provided in a General Duty version or a UL 94V-0 rated version, as needed, with no difference in performance.

Features
  • Choice of General Duty or UL 94V-0 rated versions
  • Typically require < 1 lb/in (0.175 N/mm) closure force – 5 times lower than other gaskets
  • > 90 dB attenuation from 20 MHz to 10 GHz
  • Asymmetrical profiles, as well as “C”, “V”, “P”, “D” shapes
  • No performance degradation after 10,000 compression cycles
  • Wide release liner for easy removal
  • Kiss-cut parts on release sheets for easy “peel-and-stick”
  • grounding applications
  • Self-terminating jacket – no sharp edges
  • Tested to Bellcore GR-64-Core Airborne Contaminants requirements
  • Custom lengths, custom profiles
Benefits
  • Cost-effective
  • Alternative to BeCu fingerstock
  • Pick and place installation
  • Technical application support
  • Global distributor/fabricator network
  • Application-ready custom parts (die-cut, spliced, etc.)
Note: Compression/deflection curves are typical. Dimensions shown do not include PSA thickness (0.005 inch typically). Actual size shown with PSA strip. All SOFT-SHIELD 5000 Series profiles can be supplied in either General Duty or UL 94V-0 rated versions.
101 - 112 of 112 | Results Per Page | View | Unit of Measure
1 2 3 4 5 

Item #

Jacket Type

PSA Tape Backing

Gasket Service Rating

Profile Number

Height

Width

N/A Other (to be assigned) N/A PSA tape N/A UL 94V-0 rating N/A 74037 N/A 0.060 in1.52 mm N/A 0.150 in3.80 mm
N/A Other (to be assigned) N/A PSA tape N/A UL 94V-0 rating N/A 74031 N/A 0.090 in2.30 mm N/A 0.150 in3.80 mm
N/A Other (to be assigned) N/A PSA tape N/A UL 94V-0 rating N/A 74052 N/A 0.108 in2.74 mm N/A 0.150 in3.80 mm
N/A Other (to be assigned) N/A PSA tape N/A UL 94V-0 rating N/A 74013 N/A 0.120 in3.05 mm N/A 0.150 in3.80 mm
N/A Other (to be assigned) N/A PSA tape N/A UL 94V-0 rating N/A 74055 N/A 0.110 in2.79 mm N/A 0.225 in5.72 mm
N/A Other (to be assigned) N/A PSA tape N/A UL 94V-0 rating N/A 74030 N/A 0.157 in4.00 mm N/A 0.236 in6.00 mm
N/A Other (to be assigned) N/A PSA tape N/A UL 94V-0 rating N/A 74053 N/A 0.100 in2.54 mm N/A 0.250 in6.35 mm
N/A Other (to be assigned) N/A PSA tape N/A UL 94V-0 rating N/A 74036 N/A 0.120 in3.05 mm N/A 0.250 in6.35 mm
N/A Other (to be assigned) N/A PSA tape N/A UL 94V-0 rating N/A 74006 N/A 0.140 in3.56 mm N/A 0.250 in6.35 mm
N/A Other (to be assigned) N/A PSA tape N/A UL 94V-0 rating N/A 74011 N/A 0.250 in6.35 mm N/A 0.375 in9.53 mm
N/A Other (to be assigned) N/A PSA tape N/A UL 94V-0 rating N/A 74033 N/A 0.180 in4.57 mm N/A 0.400 in10.16 mm
N/A Other (to be assigned) N/A PSA tape N/A UL 94V-0 rating N/A 74029 N/A 0.375 in9.53 mm N/A 0.500 in12.70 mm
101 - 112 of 112 | Results Per Page | View | Unit of Measure
1 2 3 4 5