Robert McKeown Company, Inc.
Robert McKeown Company, Inc.
111 Chambers Brook Road
Branchburg NJ 08876
Toll Free: 1.800.631.1125
Phone: 908.218.9000
Fax: 908.218.8949
Email: sales@robertmckeown.com
Website: www.robertmckeown.com
Print Back
1-part, translucent; fast tack-free flowable conformal coating with controlled volatility
Unit of Measure

Specifications

Type

 N/A Solventless RTV Elastomeric Conformal Coatings

Product Form

 N/A 1-part RTV cure

Color

 N/A Translucent

Viscosity

 N/A 130 mPa/s

Durometer

 N/A 25 A

Specific Gravity

 N/A 1.01

Room Temperature Tack-Free Time

 N/A 15 min

Room Temperature Cure Time

 N/A 90 min

UL 746E Approval

 N/A Pending

Shelf Life from Date of Manufacture

 N/A 12 months

Dielectric Strength

 N/A 850 V/mil33 kV/mm

Dielectric Constant at 1 MHz

 N/A 2.7

Dissipation Factor at 1 MHz

 N/A 5.00E-03

Volume Resistivity

 N/A 1.00E+17 O/cm

Features

N/A
Fast tack-free room-temperature cure; flowable; cures to soft, low-stress elastomer; controlled silicone volatility; no added solvents

Potential Uses

N/A
Protective coating for rigid and flexible circuit boards, connectors, electronic components, or sensors; fast tack-free cure, highly controlled volatility for use around relays, brush motors, and high-tolerance devices (HDD, DVD, CD).

Application Methods

N/A
Applied by spray, brush, flow or some automated pattern coating. May be dip coated with special precautions.

Cure

N/A
Time to cure is dependent on several variables including the method of application, film thickness, temperature and humidity. Tack- free time in the data table gives an indication of typical times until surface is dry enough to handle. Cure time for full cure are indications of time needed to develop full physical properties such as durometer, tensile strength or adhesion. These times, including full cure time, can be significantly improved by introducing mild heat of 60 °C or less.