Robert Mckeown Co., Inc
111 Chambers Brook Rd.
Branchburg, NJ 08876 US
Phone: 908.218.9000 • Fax: 908.218.8949
Email: sales@robertmckeown.com
All Categories > Conformal Coatings > Silicone Dow Electronics Conformal Coatings > Item # Q1-4010 Conformal Coating  


Silicone Dow® Electronics Conformal Coatings

larger image

Item # Q1-4010 Conformal Coating, Silicone Dow Electronics Conformal Coatings

1-part, transparent, medium-viscosity conformal coating





Specifications  · Features  · Potential Uses  · Application Methods  · Cure

Specifications

Type
Solventless Heat Cure Conformal Coatings

Product Form
1-part heat cure

Color
Translucent

Viscosity
825 mPa/s

Durometer
33 A

Specific Gravity
1.00

Heat Cure Time
10 min at 100 ºC

Flammability Classification
94 V-1

UL 746E Approval
Yes

Shelf Life from Date of Manufacture
12 months at 5 ºC

Military Specification
MIL-I-46058C, Amend. 7

Type, Class, Group
Type SR, QPL

Dielectric Strength
575 V/mil
23 kV/mm

Dielectric Constant at 100 Hz
2.85

Dielectric Constant at 100 kHz
2.63

Dissipation Factor at 100 Hz
0.003

Dissipation Factor at 100 kHz
0.0003

Volume Resistivity
2.1E+14 O/cm


Features

Medium viscosity; fast, low-temperature heat cure; cures to soft, low-stress elastomer; no added solvents; UV indicator for inspection; UL V-1 flammability rating; Mil Spec 46058C tested


Potential Uses

Protective coating for rigid and flexible circuit boards. These heat cure, one-part, self-priming coatings cure to flexible, transparent elastomers ideally suited for electronic printed wiring board (PWB) applications, particularly those employing sensitive components and fine pitch designs.


Application Methods

Applied by dip, spray, brush, flow or automated pattern coating. The stable bath life of these materials makes them ideal for dip coating applications.


Cure

Time to cure is dependent on film thickness, type of oven, and board population density. Heat cure time in the data table gives an indication of typical times after the coating is heated to the temperature indicated. Highly populated, large, heavy boards may take longer than the indicated times due to the large thermal mass taking extra time to warm.