Robert Mckeown Co., Inc
111 Chambers Brook Rd.
Branchburg, NJ 08876 US
Phone: 908.218.9000 • Fax: 908.218.8949
Email: sales@robertmckeown.com
All Categories > Conformal Coatings > Silicone Dow Electronics Conformal Coatings > Item # HC 2100  


Silicone Dow® Electronics Conformal Coatings

larger image

Item # HC 2100, Silicone Dow Electronics Conformal Coatings

1-part, translucent, fast tack-free high-viscosity conformal coating with controlled volatility





Specifications  · Features  · Potential Uses  · Application Methods  · Cure

Specifications

Type
Solventless RTV Elastomeric Conformal Coatings

Product Form
1-part RTV cure

Color
Translucent

Viscosity
400 mPa/s

Durometer
10 A

Specific Gravity
0.98

Room Temperature Tack-Free Time
10 min

Room Temperature Cure Time
60 min

UL 746E Approval
Pending

Shelf Life from Date of Manufacture
15 months

Dielectric Strength
625 V/mil
25 kV/mm

Dielectric Constant at 1 MHz
2.4

Dissipation Factor at 1 MHz
1.00E-03

Volume Resistivity
5.00E+15 O/cm


Features

Fast tack-free room-temperature cure; high viscosity; cures to soft, low-stress elastomer; controlled silicone volatility


Potential Uses

Protective coating for rigid and flexible circuit boards, connectors, electronic components, or sensors; fast tack-free cure, highly controlled volatility for use around relays, brush motors, and high-tolerance devices (HDD, DVD, CD).


Application Methods

Applied by spray, brush, flow or some automated pattern coating. May be dip coated with special precautions.


Cure

Time to cure is dependent on several variables including the method of application, film thickness, temperature and humidity. Tack- free time in the data table gives an indication of typical times until surface is dry enough to handle. Cure time for full cure are indications of time needed to develop full physical properties such as durometer, tensile strength or adhesion. These times, including full cure time, can be significantly improved by introducing mild heat of 60 °C or less.