Print Back
1-part, translucent coating; good flowability; good flame resistance; UL, IPC, and Mil Spec approved/recognized
Unit of Measure

Specifications

Type

Solventless RTV Elastomeric Conformal Coatings

Product Form

1-part RTV cure

Color

Translucent

Viscosity

35950 mPa/s

Durometer

34 A

Specific Gravity

1.04

Room Temperature Tack-Free Time

105 min

Room Temperature Cure Time

72 h

Flammability Classification

94 V-1

UL 746E Approval

Yes

Shelf Life from Date of Manufacture

12 months

Military Specification

MIL-I-46058C, Amend. 7

Type, Class, Group

Type SR, QPL

Dielectric Strength

450 V/mil18 kV/mm

Dielectric Constant at 100 Hz

2.52

Dielectric Constant at 100 kHz

2.52

Dissipation Factor at 100 Hz

0.004

Dissipation Factor at 100 kHz

0.001

Volume Resistivity

2.1E+14 O/cm

Features

N/A
Good flowability; room-temperature cure; no added solvents; UV indicator for inspection; UL 94V-1 recognized, IPC-CC-830, and MIL-A-46146

Potential Uses

N/A
Supplied at a higher viscosity, this material cures to a tough, durable elastomer for improved pin/solder joint coverage and thin-section encapsulation.

Application Methods

N/A
Applied by brush or flow coating or syringe dispensed for spot protection of pins or other devices.

Cure

N/A
Time to cure is dependent on several variables including the method of application, film thickness, temperature and humidity. Tack- free time in the data table gives an indication of typical times until surface is dry enough to handle. Cure time for full cure are indications of time needed to develop full physical properties such as durometer, tensile strength or adhesion. These times, including full cure time, can be significantly improved by introducing mild heat of 60 °C or less.