N/A
Low viscosity; room-temperature cure with optional heat acceleration; cures to soft, low-stress elastomer; UL 94V-0 recognized and Mil Spec approved; IPC- CC-830; UV indicator for inspection; no added solvents

N/A
Protective coating for rigid and flexible circuit boards. These fast curing, one-part, self- priming coatings cure to flexible, transparent elastomers ideally suited for electronic printed wiring board (PWB) applications, particularly those employing sensitive components and fine pitch designs.

N/A
Applied by spray, brush, flow or automated pattern coating requiring lower viscosity material. May be dip coated with special precautions.

N/A
Time to cure is dependent on several variables including the method of application, film thickness, temperature and humidity. Tack- free time in the data table gives an indication of typical times until surface is dry enough to handle. Cure time for full cure are indications of time needed to develop full physical properties such as durometer, tensile strength or adhesion. These times, including full cure time, can be significantly improved by introducing mild heat of 60 °C or less.