Print Back
Low-density, flame-retardant COHRlastic silicone foam yard goods provide outstanding performance for industries ranging from aviation and mass transit to automotive, electronics, construction and furniture.
In addition to a UL94V-0 listing in thicknesses down to 1/16", itwithstands a 2100 °F flame for more than 10 minutes without burning through in thicknesses down to 3/8".
The material, which has a nominal density of 12 pounds per cubic foot, generates very little white smoke.
Non-corrosive for use with metals and in hostile environments, it has low compression set. Among its applications are fireblocks, thermal barriers, noise and vibration dampeners, insulation and high-performance gaskets or seals.
For the aviation, automotive and mass transit industries, it offers a high degree of design flexibility. Lightweight and easy to process, it can be laminated to seat cover fabrics and carpeting as a backing for added flame resistance in passenger compartment furnishings.

The material has similar uses in institutional and residential furnishings, marine and lighting applications. It offers properties valuable in flame retardant backings for floor,wall and furniture coverings; fire-wall and thermal barriers or insulation, padding and gasketing for commercial and private marine vehicles; or gasketing and sealing in high- intensity light fixtures and electronic components in medical, computer and business equipment.
Colored gray, it is supplied in 18" and 36" wide roll stock. Thicknesses are shown in the table below. It is available plain or, on special order, laminated to any of a wide range of substrates.
Because of the unique nature of COHRlastic foam, SGPPL CHR has undertaken a rigorous testing program which is performed at outside independent laboratories.
The tests document the flame resistant properties and low levels of toxicity and smoke generation as well as mechanical and electrical properties. Details are on file at SGPPL CHR.

Tests, claims, representations and descriptions regarding flamability are based on standard laboratory tests and, as such, may not be reliable for determining, evaluating, predicting or describing the flammability or burning characteristics under actual flre conditions, whether used alone or in combination with other products. Accordingly, each potential user should make an individual determination whether the flammability or burning characteristics of the product are suitable for the purpose intended by the user.

CHR provides certification to the specifications listed when requested with order. All properties are typical values and should not be used for writing specifications. Please consult plant concerning updated specifications. Government and military specifications are being revised at the time of this catalog printing.
Unit of Measure

Specifications

Test Method Thermal Conductivity

N/A C177

Thermal Conductivity

N/A 0.42 BTU in/h·ft2 ºF (K factor)

Width

N/A 36 in
Color1 N/A Gray

Thickness

N/A 1/16 ±1/64 in1/2 ±3/64 in1/4 /+3/64 to –1/32 in1/8 ±1/32 in3/16 ±1/32 in3/8 ±3/64 in

Test Method Compression Deflection

N/A D1056

Compression Deflection

N/A 3 psi

Test Method Surface Description

N/A Visual

Surface Description

N/A Textured on one side

Test Method Tensile Strength

N/A D412

Tensile Strength

N/A 25 psi

Test Method Elongation

N/A D412

Elongation at Break

N/A 60 %

Test Method Compression Set

N/A D1056

Compression Set (Compressed 50 % for 22 h at 212 ºF)

N/A 10 %

Test Method Density

N/A D3574

Density

N/A 12 lb/ft³

Temperature Range

N/A –60 to 400 ºF

Test Method Vertical Burn

N/A UL94V-0 and FAR 25.853b

Vertical Burn

N/A < 3 s
  • 1 Standard color. Other colors available on a minimum order basis.