Print Back
1-part, white or gray, fast tack-free flowable-viscosity conformal coating with controlled volatility and good flame resistance
Unit of Measure

Specifications

Type

N/A Solventless RTV Elastomeric Conformal Coatings

Product Form

N/A 1-part RTV cure

Color

N/A Gray White

Viscosity

N/A 23300 mPa/s

Durometer

N/A 33 A

Specific Gravity

N/A 1.19

Room Temperature Tack-Free Time

N/A 8 min

Room Temperature Cure Time

N/A 360 min

Flammability Classification

N/A 94 V-0

UL 746E Approval

N/A No

Shelf Life from Date of Manufacture

N/A 15 months

Dielectric Strength

N/A 625 V/mil25 kV/mm

Dielectric Constant at 1 MHz

N/A 3.1

Dissipation Factor at 1 MHz

N/A 4.00E-03

Volume Resistivity

N/A 9.00E+14 O/cm

Features

N/A
Fast tack-free room-temperature cure; flowable; cures to soft, low-stress elastomer; pigmented to hinder component identification; UL 94 V-0 flammability rating; controlled silicone volatility; no added solvents

Potential Uses

N/A
Protective coating for rigid and flexible circuit boards, connectors, electronic components, or sensors; fast tack-free cure, highly controlled volatility for use around relays and high-tolerance devices (HDD, DVD, CD).

Application Methods

N/A
Applied by syringe dispense, brush or flow coating.

Cure

N/A
Time to cure is dependent on several variables including the method of application, film thickness, temperature and humidity. Tack- free time in the data table gives an indication of typical times until surface is dry enough to handle. Cure time for full cure are indications of time needed to develop full physical properties such as durometer, tensile strength or adhesion. These times, including full cure time, can be significantly improved by introducing mild heat of 60 °C or less.