SOFT-SHIELD 5000 Series EMI gaskets are designed to meet the stringent shielding and mechanical performance requirements of today’s commercial electronic enclosures, medical electronics, factory automation equipment, reprographics and grounding applications. A growing number of standard profiles and sizes provide flexibility when selecting a gasket for a specific application. Custom profiles or sizes can also be produced.
Each SOFT-SHIELD 5000 Series gasket consists of an electrically conductive
moreSOFT-SHIELD 5000 Series EMI gaskets are designed to meet the stringent shielding and mechanical performance requirements of today’s commercial electronic enclosures, medical electronics, factory automation equipment, reprographics and grounding applications. A growing number of standard profiles and sizes provide flexibility when selecting a gasket for a specific application. Custom profiles or sizes can also be produced.
Each SOFT-SHIELD 5000 Series gasket consists of an electrically conductive fabric jacket over a highly compressible urethane foam core. The nickel-plated, woven nylon rip-stop jacket is selfterminating when cut. Chosen for its excellent compressibility, the foam core typically requires less than 1 lb/in (0.175 N/mm) closure force, making it especially useful for thin-walled plastic enclosures. Standard pressure-sensitive adhesive attachment tape (PSA) makes SOFT-SHIELD 5000 Series gaskets a user-friendly and cost-effective design solution.
Every profile in the SOFT-SHIELD 5000 Series can be provided in a General Duty version or a UL 94V-0 rated version, as needed, with no difference in performance.
Features- Choice of General Duty or UL 94V-0 rated versions
- Typically require < 1 lb/in (0.175 N/mm) closure force – 5 times lower than other gaskets
- > 90 dB attenuation from 20 MHz to 10 GHz
- Asymmetrical profiles, as well as “C”, “V”, “P”, “D” shapes
- No performance degradation after 10,000 compression cycles
- Wide release liner for easy removal
- Kiss-cut parts on release sheets for easy “peel-and-stick”
- grounding applications
- Self-terminating jacket – no sharp edges
- Tested to Bellcore GR-64-Core Airborne Contaminants requirements
- Custom lengths, custom profiles
Benefits- Cost-effective
- Alternative to BeCu fingerstock
- Pick and place installation
- Technical application support
- Global distributor/fabricator network
- Application-ready custom parts (die-cut, spliced, etc.)
Note: Compression/deflection curves are typical. Dimensions shown do not include PSA thickness (0.005 inch typically). Actual size shown with PSA strip. All SOFT-SHIELD 5000 Series profiles can be supplied in either General Duty or UL 94V-0 rated versions.
less
