800.631.1125 Search
Primer selection guide
Specification Writers: Please contact your local Dow Corning sales office or your Global Dow Corning Connection before writing specifications on these products.

A gel can simply be poured into the cleaned repaired area and cured. When repairing an area using an encapsulant, roughen the exposed surfaces of the cured encapsulant with an abrasive paper and rinse with a suitable solvent. This will enhance adhesion and permit the repaired material to become an integral matrix with the existing encapsulant. Silicone prime coats are not recommended for adhering products to themselves.
1 - 8 of 8 | Results Per Page | View | Unit of Measure
1 

Item #

Flash Point

Volatile Organic Content (VOC)

Special Properties

For Use On

For Use With

P5200 Clear N/A 31 (87) ºC31 (87) ºF N/A 77/522 g/L N/A N/A Most metals, glass, ceramics and some plastics N/A Pigmented two-part addition cure
PR-1200 Clear N/A 13 (55) ºC13 (55) ºF N/A 723 g/L N/A N/A Most metals, glass, ceramics and some plastics N/A Pigmented two-part addition cure
PR-1200 Red N/A 13 (55) ºC13 (55) ºF N/A 723 g/L N/A Colored for easier identification N/A Most metals, glass, ceramics and some plastics N/A Pigmented two-part addition cure
P5200 Red N/A 31 (87) ºC31 (87) ºF N/A 77/521 g/L N/A Colored for easier identification N/A Most metals, glass, ceramics and some plastics N/A Pigmented two-part addition cure
PR-1204 N/A 8 (46) ºC8 (46) ºF N/A 753 g/L N/A N/A Most metals, glass and ceramics N/A All one-part alcohol cure
PR-1205 N/A 13 (55) ºC13 (55) ºF N/A 862 g/L N/A Film-forming N/A Most plastics N/A All
92-023 N/A –13 (9) ºC–13 (9) ºF N/A 681 g/L N/A Improves inhibition resistance N/A Most metals, glass and ceramics N/A All two-part addition cure
Sylgard® Prime Coat N/A –13 (9) ºC–13 (9) ºF N/A 688 g/L N/A N/A Most metals, glass and ceramics N/A All two-part addition cure
1 - 8 of 8 | Results Per Page | View | Unit of Measure
1 
^